Modified on Thu, 15 Aug, 2019 at 3:09 PM

1. Connect the VoIP-phone as shown on screenshot above.

2. Launch a web browser on a computer that can reach the phone on the network. 

3. Direct the browser to the IP-address of the phone.


  • To determine the IP-address of the phone press Menu, then press 5 key (Maintenanance) and 1 key (System Info). The IP-address will be shown on the display.
  • To set IP-address static press Menu, then 4 key (Network), and 1 key (IP – Settings). Answer "No" on the question "Are you using DHCP?". Then enter static IP.

4. SIP account configuration. Click tab Setup | Identity 1.

Identity active: on

Displayname: any word

Account: your SIP ID

Password: your SIP password

Registrar: enter SIP domain

5. Click Apply button, then click Save button to save your settings.

6. Click tab SIP, then change the parameter "Subscription Expiry" to 120. Click Apply button.

7. Click tab RTP and make codec settings as shown on screenshot below.

Click Apply, then Save button to save your settings.

Your VoIP-phone is ready to use!

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article